Controller Pairing and Mapping

After booting into your game drive, follow these steps to set up your controller:

Step 1: Connect Your Gamepad

You can use a wired, 2.4GHz dongle, or Bluetooth controller.

• Wired or 2.4GHz Dongle Controllers Simply plug them in—the system will recognize them automatically.

• Bluetooth Controllers

  These require manual pairing:

  1. Make sure your computer’s Bluetooth is enabled.

  2. Put your controller into pairing mode. For DS4 gamepad, long press [SHARE] and [PS] buttons simultaneously for 10 seconds until light indicator blinks.

  3. Press [SPACEBAR] to open the Main Menu.

  4. Navigate to: Controller & Bluetooth Settings > Pair Bluetooth Pads Automatically or Pair Bluetooth Device Manually

  5. Select your controller from the detected devices list to complete pairing.

👉 Tip: If your controller isn’t detected, restart the system and try again, or disable nearby Bluetooth devices that might be causing interference.

Step 2: Controller Mapping

After successfully pairing, map your controller to ensure all buttons are working correctly.

• Assign [SELECT] or [SHARE] as the hotkey.

• Many popular controllers come pre-mapped, but manual mapping is recommended for best performance.

Step 3: Player Assignments

Once mapping is complete, confirm that each connected controller is properly assigned to a player slot. This ensures smooth multiplayer gameplay.

RAR SWITCH

RAR CLASSIC

DS4 Wireless Gamepad Controller for PC, Laptop.

Buy Now